Gas installation video
Gas fitting site production, the use of the fuel, bellows, soft joints, valves and other accessories.
18Aug
Related Posts
13Dec
The use principle of camlock coupling
A camlock coupling is a connector that does not require tools to connect or disconnect. Camlock coupling can be... read more
19Jan
Methods the choose and buy about bibcock
See appearance: good bibcock surface chromium plating process is very exquisite, is generally after several working procedure to complete.Distinguish... read more
12May
Washing step of valve
All parts of valve must be processed through the following process before assembling and installing: 1.According to the processing requirements,... read more
21Feb
Hose Coupling Of K&G Machinery
The hose coupling is a connector on the end of a hose to connect (or couple) it with another... read more
14Sep
How is the camlock coupling size calculated?
This is an inch size Commonly used inch 1 inch is equal to 25.4 mm 1/4 "means that 1/4 inch equals 0.25... read more
28Feb
Nature characteristics of camlock Coupling
The camlock coupling is a joint that does not require the use of the tool to enable the pipe... read more
13Sep
Structure is important for ball valve
Good sealing, but the ball bear the load of the working medium all passed to the export seal, so... read more
18Aug
Common material of valve housing
1.The gray cast iron suitable for operating temperature between -15 ℃ -200 ℃, nominal pressure PN≤1.6MPa, low pressure valves.... read more
26Sep
Camlock coupling used in cooling water, warm oil
Mainly used for general-purpose mold interface. The realization of the mold to achieve the simplification of the operation, to... read more
05May
The kinds of Angle valve and action
The effect of Angle Valves: 1.The transfer inside and outside the outlet. 2.Is the water pressure is too big, can be... read more